Bosch ESI6-32N Brake Fluid (Direct Replacement for DOT 3, DOT 4, and DOT 5.1)

Description

Direct Replacement for DOT 3, DOT 4, and DOT 5.1; Quart
ESI6 is the next generation brake fluid designed for today's modern braking systems. Designed by the industry's leader in braking technology for vehicles using DOT 3, DOT 4, and DOT 5.1 brake fluid.
Features & Benefits:
High compatibility. Use with or direct replacement for DOT 3, DOT 4, and DOT 5.1 brake fluid
Extended Service Interval (ESI): Lasts 100% longer than DOT 3, 50% longer than DOT 4, and 10% longer than DOT 5.1
Exceeds all DOT 3, DOT 4, and DOT 5.1 standards
Wet boiling point ~ 365°F / Viscosity at -40 °C ~ 670mm2/s
Brake Fluid Comparison Chart
Fluid Type
Compatible With
Quality
Chemical Composition
Minimum Dry Boiling Point
Minimum Wet Boiling Point
DOT 3
DOT 3 Brake Systems
Good
Glycol Ether
401°F
284°F
DOT 4
DOT 3 & DOT 4 Brake Systems
Better
Glycol Ether, Borate Ester
446°F
311°F
DOT 5.1
DOT 3, DOT 4 & DOT 5.1 Brake Systems
Best
Glycol Ether, Borate Ester
518°F
374°F
DOT 5
DOT 5 Brake Systems
ONLY
Specialty
Silicone
500°F
356°F
How do I know if my brake fluid needs to be changed?
Brake fluid is typically clear or translucent. If your brake fluid is dirty or rust-colored, your fluid needs to be changed
If your brakes feel mushy or require a lot of pressure to engage, your brake fluid may need to be flushed or changed
Consult your owner’s manual – The manufacturer may recommend changing brake fluid when your vehicle reaches a certain number miles or years
Not returnable once opened.
Attention California Customers - WARNING: This product can expose you to chemicals including Ethylene Oxide, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Material Safety Data Sheet (MSDS)
Alternate/OEM Part Number(s): ESI632N
Direct Replacement for DOT 3, DOT 4, and DOT 5.1; Quart
ESI6 is the next generation brake fluid designed for today's modern braking systems. Designed by the industry's leader in braking technology for vehicles using DOT 3, DOT 4, and DOT 5.1 brake fluid.
Features & Benefits:
High compatibility. Use with or direct replacement for DOT 3, DOT 4, and DOT 5.1 brake fluid
Extended Service Interval (ESI): Lasts 100% longer than DOT 3, 50% longer than DOT 4, and 10% longer than DOT 5.1
Exceeds all DOT 3, DOT 4, and DOT 5.1 standards
Wet boiling point ~ 365°F / Viscosity at -40 °C ~ 670mm2/s
Brake Fluid Comparison Chart
Fluid Type
Compatible With
Quality
Chemical Composition
Minimum Dry Boiling Point
Minimum Wet Boiling Point
DOT 3
DOT 3 Brake Systems
Good
Glycol Ether
401°F
284°F
DOT 4
DOT 3 & DOT 4 Brake Systems
Better
Glycol Ether, Borate Ester
446°F
311°F
DOT 5.1
DOT 3, DOT 4 & DOT 5.1 Brake Systems
Best
Glycol Ether, Borate Ester
518°F
374°F
DOT 5
DOT 5 Brake Systems
ONLY
Specialty
Silicone
500°F
356°F
How do I know if my brake fluid needs to be changed?
Brake fluid is typically clear or translucent. If your brake fluid is dirty or rust-colored, your fluid needs to be changed
If your brakes feel mushy or require a lot of pressure to engage, your brake fluid may need to be flushed or changed
Consult your owner’s manual – The manufacturer may recommend changing brake fluid when your vehicle reaches a certain number miles or years
Not returnable once opened.
Attention California Customers - WARNING: This product can expose you to chemicals including Ethylene Oxide, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Material Safety Data Sheet (MSDS)
Alternate/OEM Part Number(s): ESI632N